Description
Grease Nıpples DIN 3405 W (D3a) 90° Flush Type
Grease Nıpples DIN 3405 W (D3a) 90° Flush
Flush-type grease Nıpples are particularly suitable for installations where extending or protruding nipples cannot be used.
ERSIONS Flush Type grease Nıpplestype 90° W (D3a) DIN 3405
In general, our flush-type grease fittings are made of steel, zinc-plated and passivated, and they are featured with a cylindrical thread.
Of course, our flush-type fittings are also available in different angle versions, with a self-forming thread, or as drive-in type. We offer various
standard types also in brass or stainless steel V2A/V4A.
Upon request, SARK manufactures flush-type grease fittings in further versions, with respect to e. g.
dimension
material
thread size
thread form (e. g. with tapered thread)
different opening pressure
surface colour (e. g. yellow passivated)
further surface treatment
etc.-
APLICATION AREA
Flush-type grease fittings are particularly suitable for installations where extending or protruding nipples cannot be used.
OPERATING INSTRUCTIONS
Flush-type fittings are only suitable for press-greasing by means of a SARK extension tube or a SARK push-type grease gun with pointed, pin-
pointed, or combi-nozzle.
Note:
Flush type grease nipples are particularly suitable for flush or recessed installation.
By using flush type nipples, the required lubrication can also be carried out on points with poor accessibility.
Drawing reference:
Form A: straight 180°
Form B: 45°
Form C: 90°