Description

Hydraulıc Grease Nıpple DIN71412 45° HS45 (H2A)

Grease Nıpple DIN71412 45° HS45 (H2A)

Hydraulıc grease nıpple 45° HS45 (H2A) 71412
SARK Hydraulic-Type Grease Nipples according to DIN 71412

APPLICATION AREA
SARK hydraulic-type nipples are suitable for all standard lubrication points, which have to be frequently lubricated in a reliably way.

Due to their multi-purpose field of application, they are the most commonly used types of grease nipples.Hydraulıc grease nıpple 45° HS45 (H2A) 71412

VERSIONS Hydraulıc grease nıpple 45° HS45 (H2A) 71412

Hydraulıc grease nıpple 45° HS45 (H2A) 71412

In general, our hydraulic-type grease nipples according to DIN are made of steel, case-hardened, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm /0.256″ – 0.008″.

For safety reasons and in order to avoid abrasion wear, the standard demands 550 HV as a minimum for a surface hardness.

Therefore, we operate this decisive process in our own curing oven.

We offer various standard types also in brass or stainless steel V2A/V4A. Of course, our hydraulic-type nipples are also available in different angle

versions, with a self-forming thread, or as drive-in type.

Hydraulıc grease nıpple 45° HS45 (H2A) 71412

SPECIAL VERSIONS Hydraulıc grease nıpple 45° HS45 (H2A) 71412

Hydraulıc grease nıpple 45° HS45 (H2A) 71412

Upon request, SARK manufactures hydraulic-type nipples in other versions, with respect to e. g.

dimension

material

thread size

thread form (e. g. with cylindrical thread)

different opening pressure

surface colour (e. g. yellow passivated)

further surface treatment

unhardened

etc.
MOUNTING INSTRUCTIONS

Hydraulıc grease nıpple 45° HS45 (H2A) 71412

In order to allow for a proper lubrication with all common grease guns, the head space, which is necessary for installation, should be considered

(please see table with dimensions).